Products - Crest Diameter and Ovality Gages

Display

Crest Diameter and Ovality Gages

The internal and external pitch diameters of tapered threaded connections are measured using the Gagemaker MRP® crest diameter gauges. These precise gauges allow you to have complete control over your quality because they instantly identify any minute deviations in diameter or ovality. These adaptable gauges may quickly be adjusted to measure thread sizes between 1½” and 20". There is no longer a need for a room full of ring or plug gauges because one gauge can inspect a variety of diameters.

Part Number : MRP-2001 Gagemaker MRP-2001 | External Crest Diameter Gage | 4.4” reach | Range 2⅜” – 20”

Products - Crest Diameter and Ovality Gages

Crest Diameter and Ovality Gages

Gagemaker MRP-2001 | External Crest Diameter Gage | 4.4” reach | Range 2⅜” – 20”

MRP-2001

Gagemaker MRP-2001-S | External Crest Diameter Gage | 4.4” Reach | Straight Blocks

MRP-2001-S

Gagemaker MRP-2001-7 | External Crest Diameter Gage | 7” reach | Range 2⅜” – 20”

MRP-2001-7

Gagemaker MRP-2001-10 | External Crest Diameter Gage | 10” reach | Range 2⅜” – 20”

MRP-2001-10

Gagemaker MRP-2002 | Internal Crest Diameter Gage | 4¼” reach | Range 2⅜” – 20”

MRP-2002

Gagemaker MRP-2002-S | Internal Crest Diameter Gage | 4¼” reach | Straight Blocks

MRP-2002-S

Gagemaker MRP-2002-7 | Internal Crest Diameter Gage | 7” reach | Range 3½” – 20”

MRP-2002-7

Gagemaker MRP-2002-10 | Internal Crest Diameter Gage | 10” reach | Range 3½” – 20”

MRP-2002-10

Gagemaker MRP-2003 | Internal/External Crest Diameter Gage | 4¼” reach | Internal Range 3½” – 20” | External Range 2⅜” – 20”

MRP-2003

Gagemaker MRP-2003-S | External/Internal Crest Diameter Gage | 2⅜” – 20” | 4¼” reach | Straight Blocks

MRP-2003-S

Gagemaker MRP-2003-7 | Internal/External Crest Diameter Gage | 7” reach | Internal Range 3½” – 20” | External Range 2⅜” – 20”

MRP-2003-7

Gagemaker MRP-2003-10 | Internal/External Crest Diameter Gage | 10” reach | Internal Range 3½” – 20” | External Range 2⅜” – 20”

MRP-2003-10

Gagemaker MRP-202 | Internal Small Crest/Pitch Diameter gage | Range 1 - 2½”

MRP-202

Gagemaker MRP-1001 | External Crest Diameter Gage | 4.4” Reach | Range 1½” - 4½”

MRP-1001

Gagemaker MRP-1002 | Internal Crest Diameter Gage | Reach 4.4” | Range 1½” - 4½”

MRP-1002